Extrusion Pipe Fittings Grade PE Granules
1.Our Extrusion Pipe Fittings Grade PE Granules are environmentally friendly, non-toxic, odorless, smokeless, smooth surface gloss and color stability.
2.PE granules for Pipe fittings have good toughness, this granule appears to color and color pattern etc. phenomenon, both to reduce cost and save additives,;plant site pollution is reduced.
3.We can supply free samples of PE granules for customers to test.
PE granules for Pipe fittings
Application:
Extrusion for Portable water pipe, Pressure pipe, Sewer & drain pipes, Chemical pipe, Cable conduct pipe.
PE pipe grade granules Characters:
| Item | Unit | Index value | Typical value |
Density | g/cm³ | —— | 1.50 |
Hardness（D, 1s) | —— | 55 | |
Tensile strength | Mpa | ≥ 9.0 | 12.0 |
Elongation at break | % | ≥ 150 | 180 |
After thermal aging in air oven（110℃*240h） | |||
Tensile strength after aging | Mpa | ≥ 10.0 | 13.5 |
Change rate of tensile strength | % | Maximum ± 30 | +13 |
Elongation after aging | % | ≥ 120 | 160 |
Change rate of elongation at break | % | Maximum ± 30 | -11 |
Thermal deformation（90℃*4h） | % | ≤ 50 | 7 |
Low temperature impact embrittlement temperature | ℃ | -25℃ | -25℃ (Pass) |
High temperature cracking resistance (130℃*5kg*1h) b | —— | No Cracking | |
20℃ Volume resistivity | Ω·m | ≥ 1.0*10^10 | 1.5*110^11 |
Dielectric strength | MV/m | ≥ 18 | 27 |
Oxygen index | % | ≥ 32 | 34 |
Smoke density | —— | ≤ 100 | 85 |
Halogen acid gas release | mg/g | ≤ 5 | 0 |
PH | —— | ≥ 4.3 | 6.0 |
Conductivity | μS/mm | ≤ 10 | 0.4 |
Toxicity index | —— | ≤ 5 | 2.5 |
Packaging Details
N.W: 25kg/bag
PE bags for inner packaging,paper & plastic moisture-proof compound bag for outer packaging.
All the packing ways can be customized.
